Pemserter Presses, Accessories & Tooling
Pemserter PS4
Why use PEMSERTER® Series 4?
These innovative insertion machines are completely pneumatic which provides a short cycle time, enabling you to increase your productivity. Plus, its 53.4 kN / 6 tons of force and a 45.7 cm / 18” throat depth provides clearance for a wide range of chassis configurations.
A compressed air connection of a maximum 6 bar is all that is required to operate the PEMSERTER® Series 4. The press also features an adjustable dwell valve, resulting in the optimum installation of self-clinching fasteners, especially useful for stainless steel panels.
Using the optional QX4 turret with revolving anvils, the changeover between one thread size and another takes just a few seconds. Anvils are , available for nuts, studs and standoffs, and can be modified to suit your components should this be required.
Regardless of processing requirements specific to your project, the PEMSERTER® 4 ensures all PEM® self-clinching and broaching fasteners are installed quickly, safely and securely.
These innovative insertion machines are completely pneumatic which provides a short cycle time, enabling you to increase your productivity. Plus, its 53.4 kN / 6 tons of force and a 45.7 cm / 18” throat depth provides clearance for a wide range of chassis configurations.
A compressed air connection of a maximum 6 bar is all that is required to operate the PEMSERTER® Series 4. The press also features an adjustable dwell valve, resulting in the optimum installation of self-clinching fasteners, especially useful for stainless steel panels.
Using the optional QX4 turret with revolving anvils, the changeover between one thread size and another takes just a few seconds. Anvils are , available for nuts, studs and standoffs, and can be modified to suit your components should this be required.
Regardless of processing requirements specific to your project, the PEMSERTER® 4 ensures all PEM® self-clinching and broaching fasteners are installed quickly, safely and securely.
Series 4 Optional Anvils
Allows nut installation into difficult close to edge reverse flanges
Allows nut installation into awkward close to edge right angle folds
Allows up to 4 tools setups to be installed on the machine simultaneously. Reduces downtime and speeds up production where differently sized nuts, studs and standoffs need to be installed into a single panel.
Series 4 press Video Demonstration
In this video we can see the Pemserter Series press being used with a QX4 turret. The press installs nuts, studs and standoffs by simple rotating the turret to change the punch to a different size or fastener as required.
The fasteners are held in the handy parts tray which can also be mounted for right or left handed operators.
The fasteners are held in the handy parts tray which can also be mounted for right or left handed operators.
The PEMSERTER® MICRO-MATE® hand tool is a versatile hand tool weighing only 1.25 kg / 2 3/4 lbs. that can develop a squeezing force of 1,134 kg / 2,500 lbs.
The kit contains one hand tool, one flat punch, seven punches and dies, one punch adapter bushing, one edge-depth guide, five fastener anvils
and a storage case. The metric kit installs nut thread sizes M2 to M5, while the unified kit installs nut thread sizes 2-56 to 10-32.
Features:
The kit contains one hand tool, one flat punch, seven punches and dies, one punch adapter bushing, one edge-depth guide, five fastener anvils
and a storage case. The metric kit installs nut thread sizes M2 to M5, while the unified kit installs nut thread sizes 2-56 to 10-32.
Features:
- Equipped with punches and dies
- Available as metric or imperial kits
Pemserter Presses, Accessories & Tooling
Pemserter PS4
Why use PEMSERTER® Series 4?
These innovative insertion machines are completely pneumatic which provides a short cycle time, enabling you to increase your productivity. Plus, its 53.4 kN / 6 tons of force and a 45.7 cm / 18” throat depth provides clearance for a wide range of chassis configurations.
A compressed air connection of a maximum 6 bar is all that is required to operate the PEMSERTER® Series 4. The press also features an adjustable dwell valve, resulting in the optimum installation of self-clinching fasteners, especially useful for stainless steel panels.
Using the optional QX4 turret with revolving anvils, the changeover between one thread size and another takes just a few seconds. Anvils are , available for nuts, studs and standoffs, and can be modified to suit your components should this be required.
Regardless of processing requirements specific to your project, the PEMSERTER® 4 ensures all PEM® self-clinching and broaching fasteners are installed quickly, safely and securely.
These innovative insertion machines are completely pneumatic which provides a short cycle time, enabling you to increase your productivity. Plus, its 53.4 kN / 6 tons of force and a 45.7 cm / 18” throat depth provides clearance for a wide range of chassis configurations.
A compressed air connection of a maximum 6 bar is all that is required to operate the PEMSERTER® Series 4. The press also features an adjustable dwell valve, resulting in the optimum installation of self-clinching fasteners, especially useful for stainless steel panels.
Using the optional QX4 turret with revolving anvils, the changeover between one thread size and another takes just a few seconds. Anvils are , available for nuts, studs and standoffs, and can be modified to suit your components should this be required.
Regardless of processing requirements specific to your project, the PEMSERTER® 4 ensures all PEM® self-clinching and broaching fasteners are installed quickly, safely and securely.
Series 4 Optional Anvils
Allows nut installation into difficult close to edge reverse flanges
Allows nut installation into awkward close to edge right angle folds
Allows up to 4 tools setups to be installed on the machine simultaneously. Reduces downtime and speeds up production where differently sized nuts, studs and standoffs need to be installed into a single panel.
Series 4 press Video Demonstration
In this video we can see the Pemserter Series press being used with a QX4 turret. The press installs nuts, studs and standoffs by simple rotating the turret to change the punch to a different size or fastener as required.
The fasteners are held in the handy parts tray which can also be mounted for right or left handed operators.
The fasteners are held in the handy parts tray which can also be mounted for right or left handed operators.
The PEMSERTER® MICRO-MATE® hand tool is a versatile hand tool weighing only 1.25 kg / 2 3/4 lbs. that can develop a squeezing force of 1,134 kg / 2,500 lbs.
The kit contains one hand tool, one flat punch, seven punches and dies, one punch adapter bushing, one edge-depth guide, five fastener anvils
and a storage case. The metric kit installs nut thread sizes M2 to M5, while the unified kit installs nut thread sizes 2-56 to 10-32.
Features:
The kit contains one hand tool, one flat punch, seven punches and dies, one punch adapter bushing, one edge-depth guide, five fastener anvils
and a storage case. The metric kit installs nut thread sizes M2 to M5, while the unified kit installs nut thread sizes 2-56 to 10-32.
Features:
- Equipped with punches and dies
- Available as metric or imperial kits