PEM eConnect® fastening technology provides repeatable, consistent electrical joints and superior installation in applications that demand superior performance from internal components
PEM eConnect® fastening technology provides superior electrical connection solutions
• No hot spots or poor conductivity
• Joint typically have an electrical resistance of less than 100 μΩ
• Range of captivation options
• Quick, secure automated installation
• Proven, application-tested performance
• Unmatched PEM® quality
• Joint typically have an electrical resistance of less than 100 μΩ
• Range of captivation options
• Quick, secure automated installation
• Proven, application-tested performance
• Unmatched PEM® quality
• Connectivity Systems
• Infotainment Systems
• Safety & Driver Assistance
• ADAS
• Body Electronics
• Engine Control Units
• Heads Up Displays
• EV Powertrain Electronic Control
• Infotainment Systems
• Safety & Driver Assistance
• ADAS
• Body Electronics
• Engine Control Units
• Heads Up Displays
• EV Powertrain Electronic Control
• Power Distribution Systems
• Power Distribution Headers
• Battery Management Systems
• Battery Pack
• Battery Disconnect Units
• EV Drivetrains
• EV Motor
• On Board Charger
• Power Distribution Headers
• Battery Management Systems
• Battery Pack
• Battery Disconnect Units
• EV Drivetrains
• EV Motor
• On Board Charger
PEM eConnect® Self Clinching and Broaching Pin Fastening Technology
Use PEM eConnect® Pin Fastening Technology for repeatable, consistent electrical joints and superior installation that’s unmatched by traditional attachment methods.
- Quick, Secure Automated Installation
- Use PEM eConnect® fastening technology with our line of fully automated installation systems for an efficient, cost-saving total system solution
- No hot spots or poor conductivity
- Joint has an electrical resistance of less than 100 μΩ
- Range of captivation options
- Available in self clinching, Type EPCRBâ„¢, and broaching, Type EPFRBâ„¢, mounting styles
- Unmatched PEM® Quality#
PEM eConnect® Busbar Connector System
As eMobility and the shift to electric vehicles and renewable energy grow in scale, the demand for reliable, low-resistance, high-strength busbar connections has never been greater.
The current default solution includes the direct plating of busbars with silver or tin, and the use of additional loose hardware to join busbars. It’s a costly series of processes that often require busbars to be shipped to multiple vendors at multiple locations before they can be completed.
Enter the new PEM eConnect® Busbar Connector System – a streamlined, cost-saving, high-performance solution for joining busbars in electric vehicles, automotive electronics, and industrial applications.
Whether you’re facing challenges like high resistance, manufacturing inefficiencies, or costly materials, the PEM eConnect® system can revolutionize how your team connects, powers, and innovates.
The current default solution includes the direct plating of busbars with silver or tin, and the use of additional loose hardware to join busbars. It’s a costly series of processes that often require busbars to be shipped to multiple vendors at multiple locations before they can be completed.
Enter the new PEM eConnect® Busbar Connector System – a streamlined, cost-saving, high-performance solution for joining busbars in electric vehicles, automotive electronics, and industrial applications.
Whether you’re facing challenges like high resistance, manufacturing inefficiencies, or costly materials, the PEM eConnect® system can revolutionize how your team connects, powers, and innovates.
This new concept  Busbar Connector System is a streamlined, cost-saving, high-performance solution for joining busbars in electric vehicles, automotive electronics, and industrial applications.Â
The new solution is a two-piece setup designed to be installed in one step with a single pressing operation. It consists of the PEM eConnect® Contact Bushing paired with our new mechanical fasteners – the ECKNâ„¢ PEM eConnect Nut and the ECKSâ„¢ PEM eConnect Stud. Â
The contact bushing is manufactured from high-conductivity copper and plated with silver or tin, for low electrical resistance. Once installed the fasteners introduce exceptional strength and durability to the design. Together, these components work seamlessly to provide superior mechanical and electrical performance.Â
The new solution is a two-piece setup designed to be installed in one step with a single pressing operation. It consists of the PEM eConnect® Contact Bushing paired with our new mechanical fasteners – the ECKNâ„¢ PEM eConnect Nut and the ECKSâ„¢ PEM eConnect Stud. Â
The contact bushing is manufactured from high-conductivity copper and plated with silver or tin, for low electrical resistance. Once installed the fasteners introduce exceptional strength and durability to the design. Together, these components work seamlessly to provide superior mechanical and electrical performance.Â
NEW - ECCB™ PEM eConnect® Contact Bushing:
• Designed for installation into straight punched holes without additional surface preparation
• Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined broach and flare install ensures consistent mechanical and electrical connections
• ECCB™ contact bushing is suitable for aluminium and copper busbars
• For use in panels with sheet hardness HRB 50 / HB 82 or less
Used to create an internal unthreaded hole with large conductive pad on one side. May be used with ECKN nut to crated threaded hole with large bearing area on both sides of the panel
• Designed for installation into straight punched holes without additional surface preparation
• Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined broach and flare install ensures consistent mechanical and electrical connections
• ECCB™ contact bushing is suitable for aluminium and copper busbars
• For use in panels with sheet hardness HRB 50 / HB 82 or less
Used to create an internal unthreaded hole with large conductive pad on one side. May be used with ECKN nut to crated threaded hole with large bearing area on both sides of the panel
ECCBâ„¢ contact bushing is suitable for aluminium and copper busbars
NEW - ECCBF™ PEM eConnect® Contact Bushing
• Designed for installation into eConnect nut to offer superior electric performance
• Bushing Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined nut and bushing install ensures consistent mechanical and electrical connections
• For use in materials with hardness HRB 50 / HB 82 or less
For use with ECKN bushing to strong internal thread and give large conductive surface on both sides of the material.
• Bushing Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined nut and bushing install ensures consistent mechanical and electrical connections
• For use in materials with hardness HRB 50 / HB 82 or less
For use with ECKN bushing to strong internal thread and give large conductive surface on both sides of the material.
ECKS™ PEM eConnect® Stud
• For use in Aluminium and Copper busbars
• Designed for installation into eConnect bushing to offer superior mechanical and electric performance
• Bushing Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined nut and bushing install ensures consistent mechanical and electrical connections
• For use in panels with hardness HRB 50 / HB 82 or less
For use with ECCBF to give a a threaded stud with strong joint with high conductivityÂ
• Designed for installation into eConnect bushing to offer superior mechanical and electric performance
• Bushing Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined nut and bushing install ensures consistent mechanical and electrical connections
• For use in panels with hardness HRB 50 / HB 82 or less
For use with ECCBF to give a a threaded stud with strong joint with high conductivityÂ
NEW - ECKN™ PEM eConnect® Nut
• For use in Aluminium and Copper busbars
• Designed for installation into eConnect bushing to offer superior mechanical and electric performance
• Bushing Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined nut and bushing install ensures consistent mechanical and electrical connections
• For use in panels with hardness HRB 50 / HB 82 or less
May be used with ECCB bushing to give a strong internally threaded bush with high conductivity pads on both sides of the panel
• Designed for installation into eConnect bushing to offer superior mechanical and electric performance
• Bushing Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined nut and bushing install ensures consistent mechanical and electrical connections
• For use in panels with hardness HRB 50 / HB 82 or less
May be used with ECCB bushing to give a strong internally threaded bush with high conductivity pads on both sides of the panel
For more information call us on 0808 123 1221
PEM eConnect® fastening technology provides repeatable, consistent electrical joints and superior installation in applications that demand superior performance from internal components
PEM eConnect® fastening technology provides superior electrical connection solutions
• No hot spots or poor conductivity
• Joint typically have an electrical resistance of less than 100 μΩ
• Range of captivation options
• Quick, secure automated installation
• Proven, application-tested performance
• Unmatched PEM® quality
• Joint typically have an electrical resistance of less than 100 μΩ
• Range of captivation options
• Quick, secure automated installation
• Proven, application-tested performance
• Unmatched PEM® quality
• Connectivity Systems
• Infotainment Systems
• Safety & Driver Assistance
• ADAS
• Body Electronics
• Engine Control Units
• Heads Up Displays
• EV Powertrain Electronic Control
• Infotainment Systems
• Safety & Driver Assistance
• ADAS
• Body Electronics
• Engine Control Units
• Heads Up Displays
• EV Powertrain Electronic Control
• Power Distribution Systems
• Power Distribution Headers
• Battery Management Systems
• Battery Pack
• Battery Disconnect Units
• EV Drivetrains
• EV Motor
• On Board Charger
• Power Distribution Headers
• Battery Management Systems
• Battery Pack
• Battery Disconnect Units
• EV Drivetrains
• EV Motor
• On Board Charger
PEM eConnect® Self Clinching and Broaching Pin Fastening Technology
Use PEM eConnect® Pin Fastening Technology for repeatable, consistent electrical joints and superior installation that’s unmatched by traditional attachment methods.
- Quick, Secure Automated Installation
- Use PEM eConnect® fastening technology with our line of fully automated installation systems for an efficient, cost-saving total system solution
- No hot spots or poor conductivity
- Joint has an electrical resistance of less than 100 μΩ
- Range of captivation options
- Available in self clinching, Type EPCRBâ„¢, and broaching, Type EPFRBâ„¢, mounting styles
- Unmatched PEM® Quality#
PEM eConnect® Busbar Connector System
As eMobility and the shift to electric vehicles and renewable energy grow in scale, the demand for reliable, low-resistance, high-strength busbar connections has never been greater.
The current default solution includes the direct plating of busbars with silver or tin, and the use of additional loose hardware to join busbars. It’s a costly series of processes that often require busbars to be shipped to multiple vendors at multiple locations before they can be completed.
Enter the new PEM eConnect® Busbar Connector System – a streamlined, cost-saving, high-performance solution for joining busbars in electric vehicles, automotive electronics, and industrial applications.
Whether you’re facing challenges like high resistance, manufacturing inefficiencies, or costly materials, the PEM eConnect® system can revolutionize how your team connects, powers, and innovates.
The current default solution includes the direct plating of busbars with silver or tin, and the use of additional loose hardware to join busbars. It’s a costly series of processes that often require busbars to be shipped to multiple vendors at multiple locations before they can be completed.
Enter the new PEM eConnect® Busbar Connector System – a streamlined, cost-saving, high-performance solution for joining busbars in electric vehicles, automotive electronics, and industrial applications.
Whether you’re facing challenges like high resistance, manufacturing inefficiencies, or costly materials, the PEM eConnect® system can revolutionize how your team connects, powers, and innovates.
This new concept  Busbar Connector System is a streamlined, cost-saving, high-performance solution for joining busbars in electric vehicles, automotive electronics, and industrial applications.Â
The new solution is a two-piece setup designed to be installed in one step with a single pressing operation. It consists of the PEM eConnect® Contact Bushing paired with our new mechanical fasteners – the ECKNâ„¢ PEM eConnect Nut and the ECKSâ„¢ PEM eConnect Stud. Â
The contact bushing is manufactured from high-conductivity copper and plated with silver or tin, for low electrical resistance. Once installed the fasteners introduce exceptional strength and durability to the design. Together, these components work seamlessly to provide superior mechanical and electrical performance.Â
The new solution is a two-piece setup designed to be installed in one step with a single pressing operation. It consists of the PEM eConnect® Contact Bushing paired with our new mechanical fasteners – the ECKNâ„¢ PEM eConnect Nut and the ECKSâ„¢ PEM eConnect Stud. Â
The contact bushing is manufactured from high-conductivity copper and plated with silver or tin, for low electrical resistance. Once installed the fasteners introduce exceptional strength and durability to the design. Together, these components work seamlessly to provide superior mechanical and electrical performance.Â
NEW - ECCB™ PEM eConnect® Contact Bushing:
• Designed for installation into straight punched holes without additional surface preparation
• Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined broach and flare install ensures consistent mechanical and electrical connections
• ECCB™ contact bushing is suitable for aluminium and copper busbars
• For use in panels with sheet hardness HRB 50 / HB 82 or less
Used to create an internal unthreaded hole with large conductive pad on one side. May be used with ECKN nut to crated threaded hole with large bearing area on both sides of the panel
• Designed for installation into straight punched holes without additional surface preparation
• Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined broach and flare install ensures consistent mechanical and electrical connections
• ECCB™ contact bushing is suitable for aluminium and copper busbars
• For use in panels with sheet hardness HRB 50 / HB 82 or less
Used to create an internal unthreaded hole with large conductive pad on one side. May be used with ECKN nut to crated threaded hole with large bearing area on both sides of the panel
ECCBâ„¢ contact bushing is suitable for aluminium and copper busbars
NEW - ECCBF™ PEM eConnect® Contact Bushing
• Designed for installation into eConnect nut to offer superior electric performance
• Bushing Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined nut and bushing install ensures consistent mechanical and electrical connections
• For use in materials with hardness HRB 50 / HB 82 or less
For use with ECKN bushing to strong internal thread and give large conductive surface on both sides of the material.
• Bushing Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined nut and bushing install ensures consistent mechanical and electrical connections
• For use in materials with hardness HRB 50 / HB 82 or less
For use with ECKN bushing to strong internal thread and give large conductive surface on both sides of the material.
ECKS™ PEM eConnect® Stud
• For use in Aluminium and Copper busbars
• Designed for installation into eConnect bushing to offer superior mechanical and electric performance
• Bushing Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined nut and bushing install ensures consistent mechanical and electrical connections
• For use in panels with hardness HRB 50 / HB 82 or less
For use with ECCBF to give a a threaded stud with strong joint with high conductivityÂ
• Designed for installation into eConnect bushing to offer superior mechanical and electric performance
• Bushing Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined nut and bushing install ensures consistent mechanical and electrical connections
• For use in panels with hardness HRB 50 / HB 82 or less
For use with ECCBF to give a a threaded stud with strong joint with high conductivityÂ
NEW - ECKN™ PEM eConnect® Nut
• For use in Aluminium and Copper busbars
• Designed for installation into eConnect bushing to offer superior mechanical and electric performance
• Bushing Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined nut and bushing install ensures consistent mechanical and electrical connections
• For use in panels with hardness HRB 50 / HB 82 or less
May be used with ECCB bushing to give a strong internally threaded bush with high conductivity pads on both sides of the panel
• Designed for installation into eConnect bushing to offer superior mechanical and electric performance
• Bushing Breaks aluminium and copper oxide layers on busbars for low resistance connections
• Combined nut and bushing install ensures consistent mechanical and electrical connections
• For use in panels with hardness HRB 50 / HB 82 or less
May be used with ECCB bushing to give a strong internally threaded bush with high conductivity pads on both sides of the panel